PUMPERS

Xtreme Hot Oil and Pressure Services are capable of pumping pressures of up to 10,000 PSI. There are two units in the fleet that are capable of 15,000 PSI. Xtreme pumpers carry 140 ft. of certified 2” 1502 iron, hamer valves and check valves which are rated at 15,000 PSI. Pumpers are all equipped with 80 ft. (1”) 5000 PSI hose for lower rate/lower pressure jobs. The work tank can carry up to 5,500 litres and has a second compartment for carrying up to 2,200 litres of methanol or other fluid products. Our pumpers are acid rated and carry a wide variety of stainless steel fittings and well-head flanges.

Fluid pumpers have the ability to pump through 15K iron and can control 5K hose pressure at the same time, which is ideal for holding casing pressure steady while pumping through tubing at high pressure. Each climate controlled cab at Xtreme is equipped with the latest data recording technology. All pumping pressures, flow metre rates, fluid temperatures and combined rates for multi-pumper jobs can be recorded to on-board computers. We have the ability to chart out, print off, thumb drive or e-mail information on location. All Xtreme units were designed with serviceability in mind.

X-24

X-24 is a trailer mounted, high pressure, high rate fluid pumper powered by a 1,000 hp deck engine. This deck engine powers a quinplex fluid end with a maximum pumping pressure of 12,000 lbs. X-24 has a 10m3 sour sealed work tank with its own built in Mission pump which is capable of batch mixing gel slugs for coil operations. It is equipped with a climate controlled cab that carries state of the art electronic touch screen data recording systems that are capable of networking with all other Xtreme fluid pumpers for high rate data frac scenarios. This unit is capable of pumping 1.8 m3 per minute at low pressure and 1 m3 per minute at high pressure.

Twin Pumpers

• (2) Twin 600 hp triplex coil pumpers
• Twin 1000 hp quinplex pumper